1. Basic C programming (reference passing value in V) 2. Verilog (Non-blocking vs blocking) 3. Linux 4. State machine coding.
Technical Design Interview Questions
31,079 technical design interview questions shared by candidates
The Bridge and Lantern Riddle Four people need to cross a narrow, dark bridge. They only have one lantern, and the bridge can hold a maximum of two people at a time. Any pair crossing must move at the speed of the slower person in the pair. The crossing times for the people are as follows: Person A - takes 1 minute to cross Person B - takes 2 minutes to cross Person C - takes 9 minutes to cross Person D - takes 10 minutes to cross The goal is for all four to cross the bridge in 17 minutes.
Questions in C Programming
Which Logic gate is better NAND or NOR
Suppose there are two inverters connected back to back. Both are working in 3V domain. What is the output if the input is given as 0V. For the same back to back inverters, if both of them are connected back to back and if both of them are working in 3V domain and if the input is 0V. what is the output.
Check the awareness of applying pre and post randomization in variables in uvm_object.
Digital IC design know how, coding.
Cross clock domain synchronization - Module A transmits @ 100 MHz and Module B accepts at 10 MHz. How will you manage the transactions?
Q. describe 2 projects in your portfolio
1st two interviewers : Volatile v/s Non Volatile memory (RAM/ROM) Basic Verilog questions like blocking v/s non-blocking, continuous vs procedural etc Explanation of all my FPGA/Verilog-related projects 2:1 MUX using basic gates Setup vs Hold, which is more important, why is it caused. metastability - how to fix it FIFO uses ASIC design flow How does synthesis happen Synchronisation vs Asynchronous clock 3rd Interviewer: Equation for power in a resistor Analysis of parallel LC circuit 2 i/p AND gate where each input is getting pwm of period 10. But on input B, an inverter of 1ms delay is attached. What's the resulting waveform? Is it practical to be used with a f/f Transfer characteristic of NOT gate Can NOT gate be used as an amplifier
Viewing 1581 - 1590 interview questions